Setting Up Home Wifi With Ease

When you are making the move to a wireless internet connection at home, you should know that this is a process that is easier than you may think. Once you have your home wifi connection set up, you will also be able to benefit from connections anywhere in your house as long as your device is within reach. The first step will be installing your router so that you can have a solid home network to get started.

There will be a number of factors to consider when picking the best router to meet your needs. For example, you need to look at transfer speed, distance, security and interference. Some of the more expensive wireless routers will offer more antennae, which will usually give you a bit more of a stable connection even when you are at a further distance.

After you select the router, you will need to connect it to your modem at home. The router will have its own port that should be labeled with WAN/WLAN/Internet. You can connect this port into your modem simply by using a standard type Ethernet cable. Just be sure that your router is all powered up and fully turned on.

Not every router that you have will come with its own software for installation, but if you have one that did, you can install it on any computer that is connected to your router through the Ethernet cable. If you have bundled software, it will make setting up your router even more convenient than having to go through a bunch of menus for configuration. Many routers will have software that automatically located your internet settings, which is the information the router has to have so that it can translate the internet connection and then transfer it to each of your wirelessly connected devices.

If you do not have installation software, you can go to the configuration page for the router using your web browser. You should be asked for the username and password, which is generally provided in the documents that came with the router. From there, you can enter in your information on your internet connection, including your IP address and the DNS information for the provider of your internet service.

Next, you can go into the wireless setting section in the router menu where you can enable or disable the signal, set the encryption, change the name of the network and more. Apply your settings, make sure that everything is saved and make it so that your router is placed in the home so that you are able to get the best possible signal. For many homeowners, this will mean finding a central location that is free of any walls, doors, and any other obstacles that could hinder the signal. If you happen to have multiple floors, you might want to consider going with more than one router so that you get the coverage that you need.

Once everything is up and running, you will see that setting up home wifi will be one of the best decisions that you could have made.

Tips for Securing Your WiFi

Most people have WiFi in their homes right now, but if you’re not really a tech enthusiast, have you put much thought into securing it?

There are a few potential security issues with WiFi. Firstly, you should make sure that your router is secure, so that if someone does get on your network somehow, they can’t easily access the router and change the configuration in a way that could cause inconvenience for you. To do this, connect to the router’s admin panel, and change the login details from the defaults. If you don’t know the details, pick the router up and look on the underside – there is a good chance that the username and password will be printed there.

Next, change the SSID – if your current SSID includes the name of the company that supplies your Internet connection, or the brand name of the router, then you should change it immediately to something generic sounding instead. This will ensure that it is that little bit harder for a would-be hacker to identify what type of device they are trying to connect to. Some people tell their router to not broadcast the SSID at all, but this makes it harder to connect to the network.

In addition, make sure that the connection is ‘secured’, so that people have to enter a passcode to connect. Unsecured connections allow anyone on, and this can put your network at risk because once a device is on the network they may be able to access other devices on the network as well (and, for example, see the files that you have shared, or snoop on unencrpyted traffic).

There are a few different connections to choose from – the most common being WEP, WPA and WPA-2. Of those, WEP is the least secure. It will deter people who are just passing by your house and hoping to ‘quickly check their emails’ from even trying to connect, but it would not stop a dedicated attacker. WPA is slightly more secure, and WPA2 is the most secure.

Choose a password that you can remember, but that is not one of the most common passwords. You have a good degree of flexibility with WPA2, so you can pick something that is not easy to guess. Change the passwords periodically so that you don’t have to worry about them being brute forced.

Update your router’s firmware if you are confident enough in your skills to do that (or get a tech-savvy friend to do it for you), and, if you have a Windows Phone or tablet, make sure that you have turned off WiFi password sharing – this is something that will share passwords with your friends, and it could inadvertently lead to your password being leaked to a lot of people (if it is shared with their friends, and so on). The actual passwords don’t become public knowledge, but it means that in theory strangers could be able to get connected to your network.

For advanced wifi or internet security, you may find cyber security companies worldwide like Their online presence gives us all a hint that protecting your network is a serious issue. There had been cases of cyber crimes around the globe, and the more our technology gets to upgrade each time, the more advanced the cyber attackers become.

Advice for Improving Your WiFi Connection

If you want your wireless internet to work better then you need to improve your WiFi connection. There are a lot of things that could be in the way of the wireless signal, for instance. If you want to find out more about improving WiFi connections, read on.

If you have a cordless phone you should not use it near your WiFi router or modem. There is a certain channel on some phones that is used and it meet the same requirements as the one used by the WiFi in your home. If you noticed that whenever someone is using the phone that the WiFi turns off or has problems then that’s probably it. Just keep the base for the phone away from the modem and router and you should be fine. And, let people know that they shouldn’t be using the phone near where the router is.

If you have your router on the wrong channel then it can be very slow. Channels on a router or basically like those on TV and that some are fuzzy and some have a perfect picture. If a lot of people in your neighborhood are using the same channel you should have weighed using it too because that traffic will slow down your connection. Most newer routers have an auto setting but that’s not always best to use because everyone will set theirs to auto so yours will be slow if it picks the same channel as everyone else.

A microwave and other devices can actually cause your WiFi signal to drop. If you have, for instance, a video game console near your microwave and you always get knocked offline when you make food, the microwave is why. Try to make note of what is going on in your home whenever WiFi connection drops or has problems. Also look around your neighborhood and see if you notice anybody having the same problems as you at the same time to ask them what they have done to make it work better and see if that works for you.

Sometimes wireless Internet is slow because your internet service provider is having problems. If there is no reason for your Internet to be slow at this point in time because you’ve tried everything to speed it up, then you need to call the internet provider. They should be able to fix up the problem or they can at least reset your connection from where they are so you have a chance to connect again at a better rate. You may also find out that you just have slow internet and they want you to pay more which is up to you.

You can improve your WiFi connection if you use the tips you were just given. There are so many different things that can get in the way of a good signal that you need to be aware of them. Whether you want to use your WiFi for gaming or work, you’re going to want it to work well.

Brief Explanation of WiFi and its History

“Do you have WiFi?” is a question that all of us have been asked at some point or another. Many times people confuse the terms “the internet” and “WiFi” believing that they are one and the same. Although they are connected, they are not the exact same thing.

What is WiFi?

WiFi is short for Wireless Fidelity and is a wireless networking technology which allows devices such as computers, iPads, some mobile phones, game consoles, etc. to communicate over a wireless signal. Similar to the way in which a radio is able to tune into radio station signals over airways, devices are able to pick up signals which connect them to the internet through the air. In fact, a Wi-Fi signal is actually a high frequency radio signal.

How Does WiFi Work?

When it comes to a wireless network, the router is a key piece of equipment. The router is actually connected physically to the internet with the use of an Ethernet cable. The high frequency radio signal mentioned above is in fact broadcasted by the router; this is what carries the data to and from the internet.

The adapter that is found in the device which is being used is able to pick up as well as read the signal that the router is emitting, it also sends this data back to the router and then on to the internet. What this is known as is upstream and downstream activity.

Due to how easily available the internet has become, especially wireless internet, taking that instant connection for granted is something which is quite east to due. Whether it is a mundane presence such as on your daily commute or mission-critical such as NASA┬┤s WiFi on the moon, the fat that wireless technology is expanding means that many more opportunities are being opened for us to work as well as play in a smarter, faster and better manner.

That being said, it was not always so simple. Not even ten years ago, to access the web, a dial-up modem was required as was having to endure from two to ten minutes of an annoying sound as it connected. So, how was it that we got here, to this point where wireless internet is just about anywhere you turn?

The University of Hawaii had in 1971 completed the first ever transfer of wireless data packet ever to be attempted without connected cables or satellite. Norman Abramson, computer scientist and engineer was the one leading the team who used a new technology that was referred to as UHF radio waves (Ultra High Frequency) and with it successfully connected seven computers; all of these had been spread out across different islands of Hawaii. They called it ALOHANET.

At that time, nearly all telecommunications were regulated by the government, however, the Federal Communications Commission in 1985 made a move that was unprecedented: they allowed for three bands for use that was unlicensed, to be opened up, what this meant was that any entrepreneur or organization was able to communicate over them.

Soon companies such as AT&T, NCR, and IBM began to develop their very own wireless local area networks, this created the technologies which became the precursor to the WiFi that we have come to know, depend on and love today.